Microphone test online

Press the button, allow access and say something. If the line moves, the microphone works.

Press the button and allow access to the microphone.

Device
—
Browser processing
—
Peak level
—
Sample rate
—
Channels
—
Input latency
—

The test runs in your browser. Sound, video and key presses are not sent or stored anywhere.

How to run the test

  1. Press “Test microphone” and allow the browser to use the microphone. If you have several microphones, choose the one you need in the list.
  2. Speak at your usual volume. The line and the level bar should move with your voice.
  3. Press “Check quality”: stay quiet for 3 seconds, then speak for 6 seconds. You will see the background noise, your voice level and whether the sound distorts.
  4. Press “Record 5 seconds” and listen to yourself. To hear the sound after browser processing, as in calls made in the browser, turn off “Raw sound”.

Questions and answers

The line does not move. What should I check?

First check that the right microphone is chosen in the list and that it is not muted by a button on the headset or the cable. Then open the sound settings of your system and raise the input volume. On Windows and macOS, also check that the browser is allowed to use the microphone in the privacy settings.

What do the quality check results mean?

dBFS is the level compared with the loudest signal the microphone can send, 0 dBFS. Background noise below −60 dBFS is quiet, up to −45 dBFS is normal, louder is noisy. A voice level from −35 to −12 dBFS is good. If your voice is 40 dB or more above the noise, that is excellent; 20 to 40 dB is good; less is noisy. Clipped samples mean that the loudest sounds are cut off. All these thresholds are approximate.

What is “Raw sound”?

For calls, browsers clean up the microphone sound: they cancel echo, suppress noise and adjust the volume automatically. Raw sound turns this off, so the test shows the noise, hum and level that the microphone really sends. Safari lets a page turn off only echo cancellation. On iPhone and iPad Raw sound is off by default, because without echo cancellation the page sound may play through the earpiece.

Do you record or keep my voice?

No. The sound is processed in your browser. The five-second recording stays in the memory of the page and disappears when you close it.

Other tests