How to run the test
- Move the pointer into the test box.
- Press the left, right and wheel buttons, then the side buttons if your mouse has them.
- Turn the wheel up and down: each direction should light up without skips.
- Move the mouse quickly in circles to see its polling rate.
Questions and answers
How do I find a double-click fault?
Click the left button slowly, one click at a time, and watch “Shortest gap between clicks”. With slow clicks, a gap under 80 milliseconds cannot come from your finger: it means the switch sends two signals for one press.
The side buttons do nothing
Some mice send the side buttons only through their own software. Check that this software has not reassigned them. In some browsers the side buttons also go back or forward a page, so use them only inside the test box.
What polling rate is normal?
An office mouse reports its position 125 times per second, a gaming mouse 500 to 1000 times or more. The measured value depends on how fast you move, so take the highest one. Some browsers limit the measurement to the refresh rate of the screen.
The wheel scrolls in jumps
If turning in one direction sometimes lights up the other one, the wheel encoder is dirty or worn. Blowing out the dust around the wheel often helps.