White screen

One press fills the whole screen with white. Set the brightness and tone first if you need softer or warmer light.

Set the brightness and tone, then press “Full screen”.

The test runs in your browser. Sound, video and key presses are not sent or stored anywhere.

How to run the test

  1. Choose a preset or set the brightness and tone with the sliders. The preview shows the result.
  2. Press “Full screen” or click the preview. While it is open, the page keeps the screen from turning off where the browser allows it.
  3. To light a video call on the same computer, press “In this window” and put the call window on top: the white around it lights your face. A phone or tablet next to the camera works too.
  4. To exit, press Esc, double-click or double-tap, or press “Close” at the bottom of the screen.

Questions and answers

Which preset suits a video call or make-up?

Match the light that is already in the room, so that your skin does not look orange or blue. Under warm home lamps choose “Warm”, near a window in the daytime choose “Daylight”, then fine-tune with the “Tone” slider while you watch the camera picture or a mirror. Turn the brightness of the screen itself up to the maximum: the slider here can only dim the light.

What do the kelvin numbers mean?

They show the colour temperature of the light: the lower the number, the warmer and yellower the light; the higher, the cooler and bluer. Household bulbs are usually 2700–3000 K, daylight is about 5000–6500 K, and standard screen white is 6500 K. The values are approximate: they assume the screen shows standard white and Night Shift or Night Light is off.

How do I trace a drawing or check the screen for dust?

For tracing, choose “Pure white”, open the full screen on a tablet or a phone and lay it flat, then put the picture on the glass and a clean sheet on top. A tap through the paper only shows the “Close” button; a quick double tap closes the white screen. Dust is easier to see on white when you look from the side: it shows as dark specks. Streaks and fingerprints show better on a black screen.

The screen dims or turns off. What can I do?

The page asks the browser to keep the screen on, but older browsers cannot do this, and power saving may still dim it. Then extend the screen timeout in the system settings (Auto-Lock on iPhone) or touch the screen now and then. To make the light turn off by itself, choose a time in “Turn off after”: when it runs out, the screen turns black and can go to sleep again.

Other tests